Repair > Rust Stain Remover

Rust Stain Remover

This easy to use poultice powder is designed to reabsorb stubborn rust, iron, bronze and/or copper stains out of stone that cannot be removed with liquid cleaners.

 

Full Directions

  1. Clean area first with distilled water. Mix 2 parts poultice powder with 1 part water to create a thick paste.
  2. Apply the paste over the stained area only.
  3. Cover the paste with plastic wrap and poke a few holes to allow for air to circulate and the poultice to dry.
  4. Once the paste has hardened, remove the plastic wrap. Fresh stains should take about 12 hours and old stains could take about 24 hours. Gently remove the dried paste with a plastic scraper.
  5. Clean the area. Reseal cleaned area with Stone Care International Granite, Stone & Grout Sealer. For deep or old stains, repeat once or twice as needed.

© CC Holdings, Inc. All Rights Reserved.Site MapTerms of UsePrivacy