Residential Cleaning > Ceramic & Porcelain Tile

Ceramic & Porcelain Tile Care


When to clean: Daily-Weekly
Product: Ceramiclean®


  • Remove all abrasive debris from the floor surface.
  • Mix 1-2 ounces of Ceramiclean per gallon of warm water.
  • With a clean bucket and clean rayon or sponge mop, apply the Ceramiclean to the surface.
  • Let the solution dry.
  • Rinsing is only required for heavily soiled surfaces.


When to clean: Every 1-2 years
Product: Stone Spray-N-Seal®


  • Surface must be dry for 6-12 Hours
  • Clean countertops with Clean Encounters® or Marbamist®. For Floors, use Marbalex®.
  • Cover surrounding areas that are not intended to be sealed.
  • Liberally spray the surface until it is wet.
  • When the surface begins to dry within 3-5 minutes, wet the surface again with the sealer.
  • After 30 minutes, wipe off any excess sealer with a clean and dry white terry cloth or towel.
  • You can also apply the Stone Spray-N-Seal® to the grout to prevent dirt from penetrating into the grout.

Print a Coupon

Get Coupons

Click here to find out more about coupons and other offers.

Get Your Coupons

© Stone Care International. All Rights Reserved.Site MapTerms of UsePrivacySite designed by WiredViews, Inc.