Floor Care

CLEANING Floors

When to clean: Daily to Weekly
Product: Marbalex®

Steps:

  • Dry/Dust mop the floor at least twice per week.
  • Pour 2 ounces of Marbalex into a clean bucket of water. (Be sure that the bucket has been thoroughly cleaned out if it has been used before with another cleaner.)
  • With a clean rayon or sponge mop, gently mop the Marbalex on to the floor surface without making large puddles.
  • Let the surface dry.
  • There is no rinsing required.

SEALING Floors

When to seal floors: Every 1-2 years
Product: Stone Spray-N-Seal®

Steps:

  • Test a small area for desired results before applying to entire surface.
  • Remove any topical waxes or stains before sealing.
  • Surface should be dry for 6-12 hours before sealing.
  • Clean countertops with Marbamist or Clean EnCounters.*
  • Cover surrounding areas that are not intended to be sealed.
  • Liberally spray the entire surface until it is wet. (Outer edges may dry quicker.)
  • When surface begins to dry within 3-5 minutes, wet the surface again with the sealer. (This will allow the sealer to properly penetrate and cure.)
  • After 30 minutes, wipe off excess sealer from the surface with a clean and dry white terry cloth towel.
  • If excess dries on the surface, spray more sealer onto the surface and wipe off immediately.

 
*For floors, use Marbalex. (It is safe to lightly clean the stone before sealing.)

Print a Coupon

Get Coupons

Click here to find out more about coupons and other offers.

 
Get Your Coupons

© Stone Care International. All Rights Reserved.Site MapTerms of UsePrivacySite designed by WiredViews, Inc.