Directions:

Preparing the Surface:

• Be sure that the surface is free from loose debris and sediment.
• Dust mop all stone floors daily to keep abrasive debris off of the surface.

Wet Mopping:

• Use two ounces of MARBALEX to one gallon of warm or cold water.
• Use clean Rayon Mops or clean Sponge Mops.
• Change the mop solution every 1,000 to 2,000 square feet.

Automatic Scrubbing:

• Use two ounces of MARBALEX to one gallon of warm or cold water.
• Use clean STONEGLIDE ALPHA Brushes.
• Rough surface stone should be scrubbed with a STONEGLIDE BETA Brush.

High Pressure Cleaning:

• Use four ounces of MARBALEX to one gallon of warm or cold water.

Intensive Cleaning:

• Use six to eight ounces of MARBALEX to one gallon of warm water and follow proper application procedures.

Sponge Cleaning (Removing thin set residue):

• Dilute two to four ounces of MARBALEX to one gallon of warm water.
• Apply solution to the surface and let it set for two minutes.
• Wipe.

Marbalex is an ideal concentrated stone floor cleaner for Marble Tile, Granite Tile, Limestone, Slate, Terra Cotta, Grout, Travertine, Soap Stone, Flag Stone and all other types of natural stone floor tiles. Marbalex is a streak free formula that is ideal for residential and commercial use and it is UL Classified for Slip Resistance. There is no rinsing required.

Recommendations:

• Always test a small area before using to assure compatibility.
• Test Area: Apply a the penetrating sealer to a small area at the project site in accordance to the manufacturers directions of the bottle label. Be sure to record all the test results including coverage and stain prevention.
• Natural stone should be protected with STONE SPRAY-N-SEAL.
• Follow the recommended SCI maintenance procedures for MARBALEX.

Approximate Sq. Ft. Gallon (3.785 Liters) Coverage:

• Polished Marble & Granite (Mopping) 21,000 sq ft
• Polished Marble & Granite (Automatic Scrubbing) 42,000 sq ft
• Flamed Granite (Automatic Scrubbing) 31,000 sq ft

Applications:

• Marble
• Granite
• Slate
• Terra Cotta
• Limestone
• Terrazzo
• Agglomerates
• Sanded Grout

Textures/Surfaces:

• Polished
• Honed
• Flamed/Thermal
• Tumbled
• Cross Cut
• Bush Hammered
• Sawn

Benefits:

• Provides residue free cleaning that will dissolve ice melt and salt crystals in winter.
• Will remove organic, biological, and inorganic soils that harm stone surfaces.
• Is an excellent cleaner for thorough rinsing of stripper residue (alkali).
• Reduces acid residue from recrystallization and powder polishing.
• MARBALEX is so gentle that it will not damage the stone surface even if it is used overmixed.

Technical Data:

• Biodegradable
• Non-toxic
• Non-corrosive
• Non-flammable
• UL Classified for slip resistance
• Colorless (Non-Staining)
• Acid and Alkali Free
• Excellent hard water tolerance
• Fragrance Free
• Safe for food handling areas

Product Warranty:

SCI guarantees complete satisfaction of its products. If not completely satisfied with the performance of the product, when used as directed and the surface has been tested first, contact Stone Care International, Inc. for a refund of the purchase price or a replacement by another SCI product. Determining the suitability of the product for any intended purpose shall be solely the responsibility of the user. There are no warranties, express or implied, including those of merchantability or fitness for particular purpose which extend beyond the description on the product label.

First Aid

• Keep all chemicals out of the reach of children.
• May cause gastrointestinal, eye or skin irritation. Do not drink and avoid eye and skin contact.
• If eye contact is made, rinse with water for 15 minutes and call a physician if symptoms continue.
• If swallowed, drink 2-3 glasses of water and call a physician immediately.
• For emergencies, call 1-800-535-5053.