Directions:

Smooth Unpolished Surfaces:

• Be sure that the surface is free from loose debris and all coatings are completely removed.
• Apply with a Rayon mop or terry cloth towel only doing 50 square feet at a time. You can also spray a small area and spread with a terry cloth towel.
• Smooth the uneven and puddled areas with the mop or terry cloth towel.
• Let the surface completely dry for five to ten minutes and add a second coat if necessary.
• Proper curing time is approximately 24 hours.

Vanities, Walls and Countertops:

• Follow the above procedures but apply the COLOR ENHANCER with a clean, soft towel.
• Let the surface completely dry for five to ten minutes and add a second coat if necessary.
• Proper curing time is approximately 24 hours.

Rough Surfaces:

• Follow all of the above procedures but apply the COLOR ENHANCER with a pump sprayer.

Routine Maintenance:

• Dust/Dry mop smooth surfaces daily.
• Rough surfaces should be swept daily.
• All surfaces treated with Stone Color Enhancer™ should be cleaned daily with MARBALEX.

Disposal:

• Dispose of following local EPA regulations.

Recommendations:

• Always test on a small area before using to determine if the product is applicable.
• Test Area: Apply the Stone Color Enhancer™ to a small area at the project site in accordance to the manufacturers directions on the bottle label. Be sure to record all the test results including coverage and stain prevention.
• Test a small area before using to determine if the ENHANCER is appropriate.
• Do not allow the ENHANCER to puddle on the surface.
• Always smooth the ENHANCER on the surface.
• Not recommended for food handling surfaces.
  

Approximate Sq. Ft. Gallon (3.785 Liters) Coverage:

• Tumbled Marble 2,200 Sq Ft
• Flamed Granite 1,200 Sq Ft
• Honed Marble 2,800 Sq Ft
• Slate 1,600 Sq Ft

Applications:

• Tumbled Marble
• Honed Marble
• Honed Granite
• Slate
• Flamed Granite
• Limestone

Textures/Surfaces:

• Tumbled
• Flamed/Thermal
• Rough Textured
• Honed
• Bush Hammered
• Sawn

*Do not use on glazed tile, polished surfaces, and non-porous surfaces. Not recommended for food handling surfaces.

Benefits:

• Enhances the color of stone without altering the stone's natural crystalline structure.
• Will not build-up on the stone surface.
• Prevents dirt from adhering to stone surfaces.
• Simple to apply.
• Slip and scuff resistant.
• Protects the stone surface.

Technical Data:

• Colorless
• Non-yellowing
• Solvent-Based
• Permeable
• U.V. Transparent
• UL Classified for Slip Resistance

Product Warranty:

SCI guarantees complete satisfaction of its products. If not completely satisfied with the performance of the product, when used as directed and the surface has been tested first, contact Stone Care International, Inc. for a refund of the purchase price or a replacement by another SCI product. Determining the suitability of the product for any intended purpose shall be solely the responsibility of the user. There are no warranties, express or implied, including those of merchantability or fitness for particular purpose which extend beyond the description on the product label.

First Aid

• If contacted with skin, rinse with gentle soap and water. Call a physician if symptoms continue.
• If contacted with eyes, rinse with water for 15 minutes. Call a physician if symptoms continue.
• If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately.
• If inhalation is excessive, get person to fresh air.
• For emergencies, call 1-800-535-5053.