Cleaning Coutertops

CLEANING: (Daily to Weekly)

Product: Marbamist® or Clean EnCounters® Simply spray Marbamist or Clean EnCounters on to the stone surface. Wipe off the cleaner with a clean and dry terry cloth or paper towel.

SEALING: (Every 1-2 years)

Product: Stone Spray-N-Seal® Surface should be dry for 6-12 hours before sealing. Clean countertop surface using Marbamist or Clean EnCounters. For stone floors, clean with Marbalex. (It is safe to lightly clean the stone before sealing.) Cover surrounding areas that are not intended to be sealed. Liberally spray the entire surface until it is wet. (Outer edges may dry quicker.) When surface begins to dry within 3-5 minutes, wet the surface again with the sealer. (This will allow the sealer to properly penetrate and cure.) After 30 minutes, wipes off excess sealer from the surface with a clean and dry white terry cloth towel. If excess dries on the surface, spray more sealer onto the surface and wipe off immediately with a clean dry terry cloth towel. For large stone floors, excess can be buffed off with a clean white buffing pad or an all cloth bonnet pad.

POLISHING & ENRICHING COLOR: (Monthly)

Product: International Stone Polish® Shake the bottle before using and apply the polish to the stone surface with a clean, dry and white terry cloth towel. Let the polish dry to a haze for 2 minutes. Wipe off the haze with a clean, dry and white terry cloth towel.

DISINFECTING: (Weekly)

Product: Counterrific™ Remove any food or debris from the countertop surface. Simply spray Counterrific on to the surface and let it stay wet for five minutes. Wipe off with a clean and dry paper towel. If any streaks appear, simply spray again and wipe off immediately.