|
|
 |
Removing Glass Rings & Dull Spots
| CLEANING: (Daily to Weekly) |
Product: Marbamist® or Clean EnCounters
- Simply spray Marbamist or Clean EnCounters on to the stone surface.
- Wipe off the cleaner with a clean and dry terry cloth or paper towel.
**For Bathrooms, use Counterrific™ Disinfectant instead of Marbamist or Clean EnCounters. |
| REMOVING GLASS RINGS & DULL SPOTS: (As Needed) |
Product: Marbacream®
- Clean the surface with Marbamist or Clean EnCounters.
- Shake the Marbacream bottle until the product thickens.
- Add a few drops of water to the damaged area.
- Apply a dab of Marbacream to the damaged area.
- With a clean and damp red buffing pad or white terry cloth towel, begin buffing in a circular motion for 30 seconds. (Be sure to apply pressure when polishing.)
**Repeat steps 2-5 if the polish is not achieved.
***If the surface is rough to the touch, Honex must be used before the Marbacream.
- Rinse with either Marbamist or Clean EnCounters and wipe it dry.
- Apply one coat of International Stone Polish to complete the process.
(Do not apply the International Stone Polish to floor surfaces.)
|
| POLISHING & ENRICHING COLOR: (Monthly) |
Product: International Stone Polish®
- Shake the bottle before using and apply the polish to the stone surface with a clean, dry and white terry cloth towel.
- Let the polish dry to a haze for 2 minutes.
- Wipe off the haze with a clean, dry and white terry cloth towel.
|
|
|
|
|
|
